Industrial Solutions

Industrial Applications

FilterPro Services Canada has access to the world’s best manufacturers of industrial filters, and a wide variety of products for removing and controlling airborne particulates and gaseous contaminants. Because the need for clean air or water is universal, FilterPro Services Canada can supply air, water and gas-phase filtration products for use in all types of filtration systems, regardless of the original manufacturer. The scope of industrial applications is unlimited and ranges from petrochemical refineries and pulp mills to remove harmful gases in computer control or electrical rack rooms to dust collectors, process water filters and HVAC filtration in foundries and mines. Our team of highly skilled filtration professionals, combined with extensive particulate, water and gas-phase filtration experience, makes FilterPro Services Canada uniquely qualified to design your total filtration solution.

Industrial Services

PARTICULATE FILTRATION


FilterPro Services Canada will meet and exceed your expectations to supply and install particulate filtration products with utmost emphasis on safety and professionalism. Whether your need is for the supply and installation of industrial grade HVAC filtration products or dust collector cartridges, our service technicians are here to service what we sell. Contact us today to discuss a service solution that’s best suited to your facility.


MOLECULAR (GAS-PHASE) FILTRATION


Molecular or gas-phase filtration is one of our core strengths and we service systems from small 250 CFM positive pressurization units to 40,000 CFM deep bed scrubbers. Corrosion of contacts and components on circuit boards accounts for over 30% of all equipment failures in industrial environments and this corrosion is caused by an unmanaged environment consisting of combinations of uncontrolled temperature and humidity, along with harmful corrosive gases inside electronic equipment rooms. Regardless if the molecular filtration system is installed to protect a data room, electrical rack room or computer control room, we understand gas concentrations fluctuate therefore there’s continuous requirement to monitor and maintain these systems to ensure operation within the guidelines as set forth by the International Society for Automation (ISA) thereby ensuring continued reliability.

FilterPro Services Canada has the trained service personnel; vacuum trucks, crane trucks and expertise to maintain industrial molecular filtration systems for 24/7 operations. Providing safe, professional and cost effective service while assisting our customers avoid the high costs of poor filtration is job one.

BASELINE FILTRATION AUDITS


Whether its a new industrial facility with no baseline data to create a filtration management program or fine-tuning an existing one, FilterPro Services Canada is able to provide a thorough audit of your filtration systems to develop this baseline along with recommendations to drive improved air quality and/or reduced long-term operation and maintenance costs. Complete the online form or give us a call today.


RETROFIT SOLUTIONS


Industrial filtration systems operate day in and day out within some of the harshest environments on earth. Since many applications see high dust loading conditions, this creates heightened stress on filter plenums and components. Since air, like water, will always take the path of least restriction, when filter plenums become too stressed the result is dirty air bypass. The end result of air going around a filter and not through it, increases costs associated with coil cleaning, duct cleaning, energy consumption, house keeping and reduced air quality to adversely affect people and process. FilterPro Services Canada offers retrofit solutions to repair or replace these tired and worn out systems with high efficiency, low static pressure solutions to improve air quality. We also offer coil cleaning to increase the transfer efficiency of your coils and reduce energy consumption by over 20% in many applications.

Only when one considers the high cost of poor filtration do we learn that the time and money used to retrofit a weakened or antiquated filtration system is time and money well spent.

- Contact Us

Industrial Products

WIRE SUPPORT PANELS (WSP)

  • Internal welded wire frames prevents filter collapse or degradation in high humidity or high dust loading conditions.
  • Single Ply WSP’s are designed for light to moderate applications such as those used on fancoils or heat pumps.
  • 2-Ply MERV 7 WSP’s are used in moderate to heavy dust loading conditions. Suited to anywhere a conventional 2" pre-filter is used at present.
  • 3-Ply MERV 8 WSP’s are used in moderate to heavy dust loading conditions on their own or as pre-filters to high efficiency secondary filters.
  • Self sealing design
  • Reduced storage and disposal versus cardboard framed filters

WIRE SUPPORT CUBES (WSC)

The WSC is offered in a variety of different medias; single ply, 2-ply or 3-ply construction in depths from 12 inches to 24 inches.

PLEATED PANEL FILTERS

Although industry standard in pleated panel filters is MERV 8 efficiency, for reduced labour, material and landfill waste we highly recommend the heavy duty MERV 10 pleat as this product is constructed with a welded wire grid on the air leaving side of the pleat pack to maintain integrity in high dust load or humid operating conditions for extended service life and reduced cost of ownership.

POCKET FILTERS

RIGID CELL


  • MERV 11, MERV 13 and MERV 14 efficiencies and constructed of aluminized steel
  • Can be recycled whereby only the spent filter media is sent to landfill
  • Commonly used in either side access housings or front access holding frames using a wide variety of pre-filters depending on application and site requirements

ASHRAE CARTRIDGE


  • Constructed of heavy gauge aluminized steel and offered in both Single Header (SH) and Double Header (DH) configurations.
  • Available in three efficiencies: 65% (MERV 11), 85% (MERV 13) and 95% (MERV 14).
  • The ASHRAE Cartridge is the workhorse of secondary filters and commonly used in commercial, industrial, medical and institutional HVAC systems to ensure high performance under difficult operating conditions.

HVAC & PROCESS FILTER HOUSINGS

  • Wide range of filter housings available from 500 CFM to over 40,000 CFM
  • Galvanized Steel, Double Wall Aluminum or 304 Stainless Steel
  • Single stage particulate, dual stage particulate, single or multi-stage carbon , HEPA, Bag-In Bag-Out (BIBO) containment housings and isolation dampers.
  • Numerous options available and we can customize to meet specific site requirements. Contact us today to discuss your project.

CORROSION CONTROL


  • Vertical or Horizontal Side Access Housings (SAH); double wall aluminum, galvanized steel or stainless steel construction
  • Front Access Housings (FAH)
  • Positive Pressure Units (PPU)
  • Deep Bed Scrubbers (DBS)
  • Fiberglass or Stainless Steel Tub Scrubbers (TS)
  • Parallel Bed Scrubbers (PBS)

In addition to corrosion control equipment, FilterPro Services Canada offers a full line of molecular filtration HVAC filters, bulk fill media canisters and 12” & 18” media modules constructed of plastic, powder coated mild steel or 304 stainless steel.

Gas Phase Media

Impregnated Activated Carbon

Engineered Oxidant Media

Potassium Carbon Blend

Wide Spectrum Triple Blend